Jump to content United States-English
HP.com Home Products and Services Support and Drivers Solutions How to Buy
» Contact HP
More options
HP.com home
HP-UX Reference > T

tsm.command(1)

HP-UX 11i Version 3: February 2007
» 

Technical documentation

» Feedback
Content starts here

 » Table of Contents

 » Index

NAME

tsm.command — send commands to the Terminal Session Manager, TSM

SYNOPSIS

/usr/tsm/bin/tsm.command command

DESCRIPTION

tsm.command is used to send a command string programmaticly to the Terminal Session Manager (TSM), as if the string were typed on the TSM command line. tsm.command fails unless it is run from inside a TSM session. Actions caused by tsm.command affect only the instance of TSM that tsm.command is run under. command can have any value that is a valid key sequence for the TSM command line. The sequence should not include the "hotkey" character that normally initiates the command line mode of TSM. The sequence should end at the point where TSM exits command mode. If it ends prematurely, TSM behaves as though escape was pressed, which exits command mode, usually canceling the command. \r should be used to indicate a return key. If no arguments are given on the command line, the program prompts for input from the user. If a ^C terminates the sequence, the remainder of the sequence is accepted from the user.

AUTHOR

tsm.command was developed by Structured Software Solutions, Inc.

SEE ALSO

tsm(1).

Printable version
Privacy statement Using this site means you accept its terms Feedback to webmaster
© 1983-2007 Hewlett-Packard Development Company, L.P.