Jump to content United States-English
HP.com Home Products and Services Support and Drivers Solutions How to Buy
» Contact HP
More options
HP.com home
Ignite-UX Administration Guide: for HP-UX 11i

Index

» 

Technical documentation

Complete book in PDF
» Feedback
Content starts here

 » Table of Contents

 » Glossary

 » Index

B

B5725AA product bundle, Getting the Ignite-UX Software
backup patch files, Avoid Archiving Patch Files
basic tab, Basic Tab
Bastille, Security
blocking devices from inventory, System Installation Configuration, Controlling the I/O Configuration Process
boot
directed (see directed boot)
boot helper
configuring Ignite, Ignite-UX bootp Boot Helper
configuring Ignite for DHCP, Ignite-UX Server and Boot Helper Setup for DHCP
Next Server, HP-UX, HP-UX DHCP PXE Next Server Boot Helper for Integrity Systems
Next Server, Linux, Linux DHCP PXE Next Server Boot Helper for HP-UX Installation
Next Server, non-HP-UX, Non-HP-UX Next Server Boot Helper
relay, Forwarding Boot Requests via bootp Relay
setting _hp_lanadmin_args, Managing Speed and Duplexing of LAN Interfaces Executing Network Boots
boot source, Boot Sources
booting, Network Booting and IP Addresses, Configuring an RDP Server for Specific MAC Addresses, Booting Itanium-Based Clients using the Network
(see also DHCP)
(see also directed boot)
(see also PXE)
(see also PXE Configuration Utility)
avoiding conflicts with RDP servers, Configuring an RDP Server for Specific MAC Addresses, Configuring an RDP Server to Delay PXE Response
boot client, Booting a Client
bootsys -c, Using bootsys on the Client Console
debugging network boot, Diagnosing Network Boot Issues
decision making, Making Boot Decisions When Using the Client Console
decision making for simple network, Simple Network Solutions
decision tree for Itanium-based network booting, Simple Network Solutions
decision tree for PA-RISC network booting, Simple Network Solutions
decision tree for stand alone systems, Boot Using Media
from an RDP server, Configuring an RDP Server to Initiate HP-UX Installation
in complex network environment, Complex Network Challenges
install kernel paths, network, Booting PA-RISC Clients from the Console
Itanium-based clients via the network, Network Booting and IP Addresses, Booting Itanium-Based Clients using the Network
Linux using an HP-UX server, Configuring an HP-UX Server to Support Linux Boot and Installation
non-network, Alternate Boot with Network Server Installation
PA-RISC clients via the network, Network Booting and IP Addresses, Booting PA-RISC Clients from the Console
registered clients over the network, Simple Network: Creating a Server for Registered Clients
understanding PXE, Understanding PXE Booting of Itanium-Based Systems
using a Linux server, Linux DHCP PXE Next Server Boot Helper for HP-UX Installation
using vMedia, Alternate Boot with Network Server Installation
bootpd daemon
and PA-RISC systems, Network Booting and IP Addresses
booting Itanium-based systems, Network Booting and IP Addresses
booting registered Itanium-based clients, Simple Network Solutions, Register the Itanium-based Clients with the Server
class-ids and PXE, Ignite-UX Server and Boot Helper Setup for DHCP
decision tree for booting Itanium-based clients, Simple Network Solutions
DHCP design, Background Information on DHCP Design
logging, Logging to syslog.log
PXE booting error, Installing Systems with Ignite-UX
replacing bootpd with instl_bootd, Simple Network Solutions, Replacing bootpd with instl_bootd
restarting after editing /etc/dhcptab, Ignite-UX Server and Boot Helper Setup for DHCP
bootptab
alternative to DHCP, Using bootptab as an Alternative to DHCP
registering Itanium-based clients, Register the Itanium-based Clients with the Server
bootsys
and HP Auto Port Aggegation (APA), Installation Using bootsys
and ssh, Ignite-UX Server Requirements, Ignite-UX Server Ports
automatic installations, Starting a Noninteractive Installation with bootsys
automatic installations choosing configuration, System Recovery Questions and Answers
bootsys -c, Using bootsys on the Client Console
from the client, Alternate Boot with Network Server Installation
from the client console, Using bootsys on the Client Console
from the server, Installation Using bootsys
in client console decision tree, Boot Using the Network
insufficient space in /stand, Installing Systems with Ignite-UX
noninteractive installations, Installation Using bootsys
ports used, Ignite-UX Server Ports
preparing the client, Preparing the Client for Installation
scheduling installations, Scheduling Installations
seems to work in reverse, Installing Systems with Ignite-UX
shutdown of client, Installing Systems with Ignite-UX
using a saved configuration, Using a Saved Configuration
bootsys_block file, Installation Using bootsys
bundles, Getting the Ignite-UX Software
(see also software bundles)
available Ignite-UX product, Getting the Ignite-UX Software
B5725AA product, Getting the Ignite-UX Software
IGNITE product, Getting the Ignite-UX Software
Ignite-UX-11-11 product, Getting the Ignite-UX Software
Ignite-UX-11-23 product, Getting the Ignite-UX Software
Ignite-UX-11-31 product, Getting the Ignite-UX Software

C

CINDEX file
adding software depot, Adding a depot
and make_[net|tape]_recovery, Recovery Image Creation Process
cloning systems with make_net_recovery, Cloning a System Using make_net_recovery
config.local, Using the recovery config.local file
default cfg clause, System Recovery Questions and Answers
modifying recovery file system layout, Selecting File Systems During Recovery
renaming a recovery image, Retaining Recovery Images
CLI, Ignite-UX Features
client
actions, Introduction to the Ignite-UX Graphical User Interface
customizing status display in Ignite-UX GUI, Introduction to the Ignite-UX Graphical User Interface
halting after installation, Configuring Session Options, Classes of Configuration Files
memory requirements, Preparing the Client for Installation
preparation for installation, Preparing the Client for Installation
status screen, Introduction to the Ignite-UX Graphical User Interface
command line interface (see CLI)
commands, Ignite-UX, Ignite-UX Commands and Manpages
config.local
and recovery, Using the recovery config.local file
and SD debugging during cold install, Installing Systems with Ignite-UX
checking syntax, Specifying Defaults in the config.local File
customizing configurations with sw_sel, Customizations Based on User Selection
defaults for all clients, Classes of Configuration Files
dynamically setting installation parameters, Setting Installation Parameters Dynamically
position in configuration clause, Configuring the Ignite-UX Server to Recognize the Golden Image
samreg error workaround, Installing Systems with Ignite-UX
specifying default settings, Specifying Defaults in the config.local File
using xpatch_save_files, Avoid Archiving Patch Files
configuration clauses, Combining Configuration Files Using INDEX Entries
configuration file
hardware keywords, Customizations Based on the Client Hardware
configuration files
changes for system recovery, Using the recovery config.local file
checking syntax, Combining Configuration Files Using INDEX Entries
creating with make_config, Classes of Configuration Files
custom installation media, Combining Configuration Files Using INDEX Entries
debugging, Debugging Configuration Files
examples, Example Configuration Files, Customizations Based on User Selection
in INDEX file clauses, Combining Configuration Files Using INDEX Entries
overview, Using Configuration Files
configuration for install
advanced, Advanced Tab
basic, Basic Tab
file system, File System Tab
software, Software Tab
system, System Tab
configuring
boot then switch source, Alternate Boot with Network Server Installation
client installation session, Configuring Session Options
clients and servers, Making Configuration Decisions for Ignite Servers
complex network, Complex Networks
file system for client, File System Tab
general server parameters, More Server Setup Options
Ignite boot helper for DHCP, Ignite-UX Server and Boot Helper Setup for DHCP
simple network, Simple Network Solutions
simple server, Simple Network: Creating a Server for Registered Clients, Simple Network: Creating a Server for Anonymous Clients
control_from_server, Example PA-RISC Installation Tape Creation
copyutil, System Recovery
custom installation media
accessing a serial tape depot, PA-RISC Installation Tape Creation Example
DVD, Assumptions
overview, Why Use Custom Installation Media?
PA-RISC tape formats, Possible Installation Tape Contents
tape, PA-RISC Installation Tape Creation Example
using, Boot and Install Client from Media
custom installation scripts, Advanced Tab
custom installations, Customizing Your Installation

D

daemons
bootpd (see bootpd daemon)
dhcpclient, Background Information on DHCP Design
inetd, Replacing bootpd with instl_bootd, Installing Systems with Ignite-UX
instl_bootd (see instl_bootd daemon)
rbootd, Installing Systems with Ignite-UX
replacing bootpd with instl_bootd, Simple Network Solutions, Replacing bootpd with instl_bootd
rpc.lockd, Installing Systems with Ignite-UX
rpc.statd, Installing Systems with Ignite-UX
swagentd, Ignite-UX Server Ports
tftpd (see tftpd daemon)
xntpd, Network Services... Button
date, setting, System Tab
day, setting, System Tab
dbprofile, Direct Boot Profiles for Itanium-Based Systems
(see also directed boot)
and other boot and install options, Boot Using the Network
command information, The dbprofile Command
using, Direct Boot Profiles for Itanium-Based Systems
debugging
configuration files, Debugging Configuration Files
network boot, Diagnosing Network Boot Issues
SD during cold install, Installing Systems with Ignite-UX
decision tree
booting stand alone systems, Boot Using the Network, Boot Using Media
network booting Itanium-based systems, Simple Network Solutions
network booting PA-RISC systems, Simple Network Solutions
default-installed software bundle, Category
definition
of terms, Glossary
terminology, Glossary
depot
additional software setup on the server, Setting Up Additional Software on the Server
changing location for install, Change Depot Location... Button
example config file, Example Configuration Files
Ignite-UX product, Getting the Ignite-UX Software
installing during interactive install, Change Depot Location... Button
multiple versions of VxVM, SD Software
OE software setup on the server, Setting Up Software from OE Depots
ports used for install, Ignite-UX Server Ports
position on a PA-RISC installation tape, Possible Installation Tape Contents
selecting software for install, Software Tab
serial, for tape, Creating and Modifying a Serial Depot and its Configuration File for Tape
sw_source, sw_sel, and sw_category in a config file, Combining Configuration Files Using INDEX Entries
DHCP
adding boot addresses, Configuring Server Options
anonymous client booting, Ignite-UX Server and Boot Helper Setup for DHCP
class ids, Isolating Ignite-UX From Noncontrollable DHCP Servers
design, Background Information on DHCP Design
design information, Using bootptab as an Alternative to DHCP
document information, Configuring DHCP Services
example uses, DHCP Usage Examples
isolating noncontrollable servers, Isolating Ignite-UX From Noncontrollable DHCP Servers
PXE, Understanding PXE Booting of Itanium-Based Systems
server, configuring, Configuring DHCP Services, Background Information on DHCP Design
using bootptab, Using bootptab as an Alternative to DHCP
DHCP device group
booting of Itanium-based anonymous clients, Ignite-UX Server and Boot Helper Setup for DHCP
isolating from noncontrollable DHCP servers, Isolating Ignite-UX From Noncontrollable DHCP Servers
usage examples, DHCP Usage Examples
dhcpclient daemon, Background Information on DHCP Design
direct boot profiles, Direct Boot Profiles for Itanium-Based Systems
(see also dbprofile)
directed boot
detailed information, Direct Boot Profiles for Itanium-Based Systems
overview, Understanding PXE Booting of Itanium-Based Systems, Directed Boot
disk arrays, Disk Arrays
Disk Selection - Add/Remove Disks dialog box, Add/Remove Disks... Button
Disk Selection - Root Disk dialog box, Root disk... Button
disks
adding and removing, Add/Remove Disks... Button
blocking from inventory, System Installation Configuration, Controlling the I/O Configuration Process
renaming file system structure, Adding or Changing a File System Configuration
setting parameters, File System Tab
supported, Supported Peripherals
DISPLAY, Ignite-UX Server Requirements, Adding Clients for Recovery
DNS
configuring, Network Services... Button
screen, Network Services... Button
documentation
about this document, About This Document
computing swap space, Root Swap (MB)... Button
file system size limitations, Adding or Changing a File System Configuration
HP-UX, About This Document
related, Related Documents
DVD, building installation media, Assumptions

F

FAQ, Ignite-UX, Related Websites
file system
setting client parameters, File System Tab
size limitations, Adding or Changing a File System Configuration
size requirements for Ignite-UX servers, Ignite-UX Server Requirements
tab, File System Tab
firewall, Security
firmware
finding information, Firmware
prompt, Booting PA-RISC Clients from the Console
support for EFI tape boot, Tape Recovery for Itanium-Based Systems
updates for direct boot profiles, Boot Using the Network

G

glossary, Glossary
Go!
description, Functions Available From All Tabs
in the startup phase, Startup
initiate preinstall check, Executing the Installation
initiating installation, Executing the Installation
ports used, Ignite-UX Server Ports
golden images
installing from, Installing from Golden Images
overview, Installing from Golden Images
pros and cons, Notes on Cloning Systems
troubleshooting, Installing from Golden Images
graphical user interface (GUI)
client colors, Introduction to the Ignite-UX Graphical User Interface
detailed introduction, Introduction to the Ignite-UX Graphical User Interface
menus, Introduction to the Ignite-UX Graphical User Interface
overview, Ignite-UX Features
selecting server GUI for install, Configuring Server Options
using to install clients, Installation Using the Ignite-UX GUI

H

halting client after installation, Configuring Session Options, Classes of Configuration Files
HFS file systems, File System: List Button
history
configuring to automatically save or not, Configuring Session Options
log file location, Configuring Session Options
moving client, Introduction to the Ignite-UX Graphical User Interface
setting default printer for printing, Configuring Server Options
viewing, Introduction to the Ignite-UX Graphical User Interface
hop count
configuring, Network Services... Button
HP-UX
11i v3 multipathing, Introducing Multipathing
bootstrap loader, A Description of the Files in the LIF Volume.
commands in a post-installation script, Adding a Post-Installation Script
documentation, About This Document
file system sizes for Ignite-UX servers, Ignite-UX Server Requirements
install file system image, A Description of the Files in the LIF Volume.
install kernel, A Description of the Files in the LIF Volume.
installation media, Getting the Ignite-UX Software, Creating Your Own Installation Media
installing from client console, Booting and Installing HP-UX From the Server Using the Client Console
installing from the Ignite-UX server, Booting and Installing HP-UX on Clients Using the Server
media kit, Boot and Install Client from Media
recovering critical files, Recovering the LIF/EFI Volume and Critical HP-UX Files
release identifiers, HP-UX 11i Release Names and Release Identifiers
selecting operating system environment, Basic Tab
software bundles, Category
supported versions for Ignite-UX server, Ignite-UX Server Requirements
versions Ignite bundles can install, Getting the Ignite-UX Software
hyperthreading, Additional... Button

I

I/O configuration, Controlling the I/O Configuration Process
I/O inventory
and recovery, Recovery and the Agile View
blocking, System Installation Configuration, Controlling the I/O Configuration Process
display in itool, Initializing the Installation
IGNITE product bundle, Getting the Ignite-UX Software
Ignite-UX
bundles, Getting the Ignite-UX Software
commands, Ignite-UX Commands and Manpages
disk requirements, Ignite-UX Server Requirements
FAQ, Related Websites
features, Ignite-UX Features
hardware requirements, Ignite-UX Server Requirements
installing on clients, Category
interface, View/Print Manifest Dialog Box
manpages, Ignite-UX Commands and Manpages
obtaining software, Getting the Ignite-UX Software
overview, Ignite-UX Overview
phases of operation, Phases of Operation
website, Related Websites
Ignite-UX server
adding software, Setting Up Additional Software on the Server
boot client, Booting a Client
problems, Ignite-UX Server Problems
requirements, Ignite-UX Server Requirements
troubleshooting, Ignite-UX Server Problems
IgniteDHCPDeviceGroup
isolating from noncontrollable DHCP servers, Isolating Ignite-UX From Noncontrollable DHCP Servers
usage examples, DHCP Usage Examples
important terms, Glossary
INDEX file
automatic installations, Starting a Noninteractive Installation with bootsys
combining configuration files, Combining Configuration Files Using INDEX Entries
default cfg clause, System Recovery Questions and Answers
examples, Combining Configuration Files Using INDEX Entries
inetd daemon
checking for errors, Installing Systems with Ignite-UX
replacing bootpd with instl_bootd, Replacing bootpd with instl_bootd
starting instl_bootd, Installing Systems with Ignite-UX
install environment
and disk arrays, Disk Arrays
and Ignite-UX boot helpers, Ignite-UX bootp Boot Helper
boot, then switch sources, Alternate Boot with Network Server Installation
in startup phase, Phases of Operation
overview, The Ignite-UX Install Environment
VxVM and persistent DSFs, Important Characteristics of the Agile View
install file system
and bootsys from the client, Alternate Boot with Network Server Installation
and custom installation media, Logical Interchange Format
and DHCP, Isolating Ignite-UX From Noncontrollable DHCP Servers, Manage Clients That Will Use DHCP During and After Installation, Manage Clients with Temporary IP Addresses During Installation
and the boot source, Boot Sources
as part of the install environment, The Ignite-UX Install Environment
as part of the LIF volume, A Description of the Files in the LIF Volume.
in startup phase, Startup
install kernel
and bootsys from the client, Alternate Boot with Network Server Installation, Preparing the Client for Installation
and the boot source, Boot Sources
as part of the install environment, The Ignite-UX Install Environment
as part of the LIF volume, A Description of the Files in the LIF Volume.
boot paths, network, Booting PA-RISC Clients from the Console
in startup phase, Startup
install params, setting dynamically, Setting Installation Parameters Dynamically
installation media
custom (see custom installation media)
HP-UX media kit, Boot and Install Client from Media
installation scripts, Advanced Tab
installing
and Servicecontrol Manager, Ignite-UX Features
automated, Automating Installations
client console methods, Booting and Installing HP-UX From the Server Using the Client Console
client console walkthrough, Installing HP-UX From the Client Console
from custom media, Boot and Install Client from Media
from media kit, Boot and Install Client from Media
from media, troubleshooting, Installing from Media
golden images, Installing from Golden Images
Ignite-UX product, Getting the Ignite-UX Software
Ignite-UX server GUI walkthrough, Installation Using the Ignite-UX GUI
Linux using an HP-UX server, Configuring an HP-UX Server to Support Linux Boot and Installation
methods, Methods of Installing Client Systems
preinstall analysis, Executing the Installation
preparing the client, Preparing the Client for Installation
RedHat, RedHat Installation From an HP-UX Server
SuSE, SuSE Installation From an HP-UX Server
troubleshooting, Installing Systems with Ignite-UX
using defaults, The Client Installation Configuration Interface
Windows, Configuring an HP-UX Server to Support Windows Installation
installing client systems, server method, Installation Using the Ignite-UX GUI
instl_adm
checking syntax of config files, Combining Configuration Files Using INDEX Entries, Specifying Defaults in the config.local File
setting boot control parameters, Classes of Configuration Files
setting gateway on boot helper, Ignite-UX bootp Boot Helper
setting install file system, Classes of Configuration Files
setting install params dynamically, Setting Installation Parameters Dynamically
setting network duplex, Examples
setting server on boot helper, Ignite-UX bootp Boot Helper
instl_adm(4), Using Configuration Files
instl_bootd daemon
and updating instl_boottab, Register the PA-RISC Clients with the Server
booting anonymous PA-RISC clients, Using the Server Setup Wizard
booting PA-RISC systems, Network Booting and IP Addresses
booting registered PA-RISC clients, Simple Network Solutions
decision tree for booting Itanium-based clients, Simple Network Solutions
installing clients on multiple subnets, Installing Systems with Ignite-UX
problems installing from client, Simple Network Debugging
problems with finding server, Installing Systems with Ignite-UX
replacing bootpd with instl_bootd, Simple Network Solutions, Replacing bootpd with instl_bootd
instl_boottab
and boot helper systems, Ignite-UX bootp Boot Helper
and bootptab, Using bootptab as an Alternative to DHCP
assigning boot IP addresses, Network Booting and IP Addresses
configuring for anonymous clients, Simple Network Solutions, Configuring an Ignite Server to Boot Anonymous PA-RISC Clients
editing, Editing the instl_boottab file
installing clients on multiple subnets, Installing Systems with Ignite-UX
problems with finding server, Installing Systems with Ignite-UX
registering PA-RISC clients, Simple Network Solutions, Register the PA-RISC Clients with the Server
replacing bootpd with instl_bootd, Simple Network Solutions
updating for instl_bootd, Register the PA-RISC Clients with the Server
interactive swinstall, Change Depot Location... Button
inventory
blocking, System Installation Configuration, Controlling the I/O Configuration Process
hardware display in itool, Functions Available From All Tabs
IP address
setting with DHCP, Configuring DHCP Services
IPFilter, Security
iso image, Assumptions
itool
advanced tab, Advanced Tab
and SCRIPTS LIF volume content, A Description of the Files in the LIF Volume.
basic tab, Basic Tab
file system tab, File System Tab
new installation, Initializing the Installation
software tab, Software Tab
system tab, System Tab
TUI, Installing HP-UX From the Client Console

L

lanboot, Direct Boot Profiles for Itanium-Based Systems
(see also directed boot)
command information, The lanboot Command
using, Direct Boot Profiles for Itanium-Based Systems
language, specifying, Languages... Button
license
HP-UX, selecting, Basic Tab
LIF volume
creating one for a PA-RISC installation tape, Example PA-RISC Installation Tape Creation
description of content, A Description of the Files in the LIF Volume.
for a recovery tape, Creating and Using Recovery Tapes
on a PA-RISC installation tape, Possible Installation Tape Contents
overview, LIF Volume Contents
rebuilding during expert recovery, Recovering the LIF/EFI Volume and Critical HP-UX Files
lightweight boot helper (see boot helper, Next Server)
Linux
boot and installation enablement by Ignite-UX, Configuring an HP-UX Server to Support Linux Boot and Installation
HP-UX boot helper, Linux DHCP PXE Next Server Boot Helper for HP-UX Installation
RedHat installation, RedHat Installation From an HP-UX Server
servers interfering with HP-UX boot, Understanding PXE Booting of Itanium-Based Systems
SuSE installation, SuSE Installation From an HP-UX Server
LLA, Customizations Based on the Client Hardware
(see also MAC address)
keyword in configuration file, Customizations Based on the Client Hardware
LVM
agile view DSFs, Important Characteristics of the Agile View
config file example, Example Configuration Files
file system default choices, File System: List Button
file system size limitations, Adding or Changing a File System Configuration
group parameters, ---- Additional Tasks ---- List Button
recovery considerations, Recovery Image Creation Process
supported devices, Disks and Other I/O
volume parameters, ---- Additional Tasks ---- List Button
volume requirements, Volume Requirements for LVM and VxVM

M

MAC address
and anonymous clients, Simple Network Solutions, Overview of Anonymous Clients, Using the Server Setup Wizard
and registered clients, Simple Network Solutions, Register the Itanium-based Clients with the Server
and the /var/opt/ignite/clients directories, Using the Per-Client Configuration File, System Recovery Questions and Answers
registering clients using the GUI, Register the PA-RISC Clients with the Server
selecting an EFI boot option, Recovering using the Network for Itanium-Based Clients
make_boot_tape
recovering a system not on network, System Recovery Questions and Answers
recovering across subnets, Recovering using the Network for PA-RISC Clients
two-step media recovery, Tape Recovery With No Tape Boot Support — Two-Step Media Recovery
make_ipf_tape
recovering a system not on the network, System Recovery Questions and Answers
make_media_install
error messages, Error messages
making boot and installation CD/DVDs, Assumptions
network recovery, System Recovery Questions and Answers
overview, Ignite-UX Features
make_net_recovery
cloning systems, Notes on Cloning Systems
compared to make_tape_recovery, System Recovery Tools
overview, System Recovery
using, Creating and Using Network Recovery Images
make_sys_image
cloning systems, Notes on Cloning Systems
make_tape_recovery
cloning systems, Notes on Cloning Systems
compared to make_net_recovery, System Recovery Tools
duplicating a system, Recovery Tape Creation Examples
examples, Recovery Tape Creation Examples
overview, System Recovery
using, Creating and Using Recovery Tapes
managing network printers, Adding a Post-Installation Script
manifest, Viewing and Printing a Manifest
manifest files, Viewing and Printing a Manifest
manpages, Ignite-UX Commands and Manpages
memory requirements for clients, Preparing the Client for Installation
multiuser mode
booting Itanium-based systems, Recovering the LIF/EFI Volume and Critical HP-UX Files
booting PA-RISC systems, Recovering the LIF/EFI Volume and Critical HP-UX Files

O

OE software
setup on server via wizard, Setting Up Software from OE Depots
operating system archives
configuring server for, Configuring the Ignite-UX Server to Recognize the Golden Image
creating, Creating a Golden Image
enabling client, Enabling the Client
installing on client, Installing the Golden Image on the Client
optional software bundle, Category

P

parameters
advanced, File System Tab
disk, File System Tab
file system, File System Tab
system, System Tab
patches
avoiding backup files, Avoid Archiving Patch Files
peripherals supported, Supported Peripherals
ports
client-based boot and install, Ignite-UX Server Ports
client-based make_net_recovery, Ignite-UX Server Ports
client-based make_sys_image, Ignite-UX Server Ports
Ignite server usage, Ignite-UX Server Ports
Itanium-based LAN boot, Ignite-UX Server Ports
PA-RISC LAN boot, Ignite-UX Server Ports
privileged ports on the client with ssh, Ignite-UX Server Ports
replacing bootpd with instl_bootd, Replacing bootpd with instl_bootd
server-based bootsys of live client, Ignite-UX Server Ports
server-based make_net_recovery, Ignite-UX Server Ports
swinstall, Ignite-UX Server Ports
updating Bastille for Ignite client, Enabling Ignite-UX Client Requirements
updating Bastille for Ignite server, Enabling Ignite-UX Server Requirements
post-install scripts, Using Post-Installation Scripts
preinstall analysis, Executing the Installation
print_manifest, Viewing and Printing a Manifest
PXE
and configuring for anonymous clients, Ignite-UX Server and Boot Helper Setup for DHCP
Next Server, HP-UX, HP-UX DHCP PXE Next Server Boot Helper for Integrity Systems
Next Server, Linux, Linux DHCP PXE Next Server Boot Helper for HP-UX Installation
Next Server, non-HP-UX, Non-HP-UX Next Server Boot Helper
troubleshooting PXE boot errors, Common Network Booting Errors
troubleshooting PXE-E16 error, Installing Systems with Ignite-UX
understanding PXE booting, Understanding PXE Booting of Itanium-Based Systems
PXE Configuration Utility
creating an HP-UX MenuOption, Setting up RDP MenuOptions via Interactive UI
delaying boot response from RDP servers, Configuring an RDP Server to Delay PXE Response
HP-UX boot from RDP server, Configuring an RDP Server to Initiate HP-UX Installation
logging boot and TFTP activity, RDP Diagnosing and Debugging
selective boot response from RDP server, Configuring an RDP Server for Specific MAC Addresses
using an HP-UX MenuOption, Using an RDP MenuOption for HP-UX

R

RDP server set up (see PXE Configuration Utility)
using an HP-UX MenuOption, Using an RDP MenuOption for HP-UX
using Windows commands, Setting up RDP MenuOptions via Windows Commands
recommended software bundle, Category
record keeping, manifest, Viewing and Printing a Manifest
recovery, System Recovery, Tape Recovery With No Tape Boot Support — Two-Step Media Recovery, Expert Recovery
(see also expert recovery)
(see also network recovery)
(see also tape recovery)
(see also two-step media recovery)
archive configuration policies, Recovery Image Configuration Policies
archive contents, Recovery Image Contents
changing file system layout, Selecting File Systems During Recovery
configuration files additions, Using the recovery config.local file
create a network image, Creating and Using Network Recovery Images
creating a recovery tape, Creating and Using Recovery Tapes
creating network image, Creating and Using Network Recovery Images
examine image contents, Examining Recovery Image Contents
image creation process, Recovery Image Creation Process
matrix comparing tape and net recovery, Comparing System Recovery Tool Features
overview, Overview
pros and cons, Notes on Cloning Systems
Q and A, System Recovery Questions and Answers
recovering a system not on network, System Recovery Questions and Answers
SAS devices, System Recovery
system, System Recovery, Creating and Using Network Recovery Images
system tools, System Recovery Tools
tools comparison, Recovery Image Contents
using a network image, Creating and Using Network Recovery Images
using a recovery tape, Creating and Using Recovery Tapes
verify recovery images, Verifying Recovery Image Results
versions of Ignite, Reconciling Client and Server Ignite-UX Versions for Recovery
RedHat (see Linux)
registered clients, Simple Network: Creating a Server for Registered Clients
required software bundle, Category
requirements
client, Preparing the Client for Installation
Ignite-UX server, Ignite-UX Server Requirements
volume, Volume Requirements for LVM and VxVM
rpc.lockd daemon, Installing Systems with Ignite-UX
rpc.statd daemon, Installing Systems with Ignite-UX
run_ui, Example PA-RISC Installation Tape Creation

S

SAS devices
recovery, System Recovery
scheduling automatic installations, Scheduling Installations
screens (see List of Figures)
scripts, post-install, Using Post-Installation Scripts
SD (see Software Distributor)
selectable software bundle, Category
server
configuring options, More Server Setup Options
selection, Booting PA-RISC Clients from the Console
setting up additional software, Setting Up Additional Software on the Server
setting up non-SD software, Non-SD Software
setting up OE software via wizard, Setting Up Software from OE Depots
setup for anonymous clients, Simple Network: Creating a Server for Anonymous Clients
setup wizard (see server setup wizard)
server selection
not supported on Integrity systems, Understanding PXE Booting of Itanium-Based Systems
overview, Server Selection
server setup wizard
for anonymous clients, Using the Server Setup Wizard
launching from welcome screen, Introduction to the Ignite-UX Graphical User Interface
walkthrough, Launch the Server Setup Wizard
set
root password, Set Root Password...
time zone, Set Time Zone Button
set_parms, System Tab
setting install params dynamically, Setting Installation Parameters Dynamically
single-user mode
booting Itanium-based systems, Recovering the LIF/EFI Volume and Critical HP-UX Files
booting PA-RISC systems, Recovering the LIF/EFI Volume and Critical HP-UX Files
software
selecting for installation, Software Tab
setting up additional on server, Setting Up Additional Software on the Server
setting up non-SD on server, Non-SD Software
setting up OE via wizard, Setting Up Software from OE Depots
software bundle
always installed, Category
default-installed, Category
optional, Category
recommended, Category
required, Category
selectable, Category
selectablility on software tab, Product
selecting with sw_sel, Combining Configuration Files Using INDEX Entries
software bundles, Getting the Ignite-UX Software
(see also bundles)
putting in a depot for Ignite-UX, SD Software
Software Distributor
debugging during cold install, Installing Systems with Ignite-UX
port usage on an Ignite server, Ignite-UX Server Ports
Software Manager, Change Depot Location... Button
software tab, Software Tab
ssh
Ignite usage, Ignite-UX Server Requirements
port usage on make_net_recovery, Ignite-UX Server Ports
port usage with bootsys, Ignite-UX Server Ports
selecting via GUI for recovery, Adding Clients for Recovery
ssh_config, Ignite-UX Server Ports
stand alone systems
booting, Boot Using the Network, Boot Using Media
static routes
configuring, Network Services... Button
screen, Network Services... Button
supported peripherals, Supported Peripherals
SuSE (see Linux)
sw_category, Combining Configuration Files Using INDEX Entries
sw_sel, Combining Configuration Files Using INDEX Entries
customizing configurations, Customizations Based on User Selection
sw_source, Combining Configuration Files Using INDEX Entries
swap space, specifying, Root Swap (MB)... Button
swinstall
port usage, Ignite-UX Server Ports
swm, Change Depot Location... Button
system recovery, System Recovery
system recovery tools, System Recovery Tools
system tab, System Tab

T

tab
advanced, Advanced Tab
basic, Basic Tab
file system, File System Tab
software, Software Tab
system, System Tab
tape boot
creating EFI tape boot option, Tape Recovery for Itanium-Based Systems
support for, Ignite-UX Server Requirements
tape recovery with no tape boot support, Tape Recovery With No Tape Boot Support — Two-Step Media Recovery
two-step using boot CD/DVD, Boot CD/DVD Creation Examples
tape depot, accessing, PA-RISC Installation Tape Creation Example
tape recovery
configuring to show all information, Configuring Session Options
creating and using recovery tapes, Creating and Using Recovery Tapes
examples, Recovery Tape Creation Examples
for Itanium-based systems, Tape Recovery for Itanium-Based Systems
for PA-RISC systems, Tape Recovery for PA-RISC Systems
from Actions menu, Introduction to the Ignite-UX Graphical User Interface
overview, System Recovery
pros and cons, Notes on Cloning Systems
Q and A, System Recovery Questions and Answers
troubleshooting, System Recovery Questions and Answers
with no tape boot support, Tape Recovery With No Tape Boot Support — Two-Step Media Recovery
tasks
adding DHCP boot addresses, Configuring Server Options
automatic installations, Using the Per-Client Configuration File
automatic system recovering, System Recovery Questions and Answers
client recovery via the network, Examples of Network Recovery Image Creation
cloning systems, Cloning a System Using make_net_recovery
configuring client installations, Configuring the Installation
configuring server for OS archive, Configuring the Ignite-UX Server to Recognize the Golden Image
configuring server options, More Server Setup Options
configuring session options, More Server Setup Options
create system recovery image from an Ignite-UX server, Adding Clients for Recovery
creating an OS archive, Creating a Golden Image
duplicating a system, Recovery Tape Creation Examples
image creation with ignite, Recovery Image Creation Process
obtaining Ignite-UX software, Getting the Ignite-UX Software
preparing clients for installation, Preparing the Client for Installation
recovering a minimal operating system, Recovery Tape Creation Examples
recovering a root disk, Recovery Tape Creation Examples
recovering from the client, Examples of Network Recovery Image Creation
recovering Itanium-based clients using the network, Recovering using the Network for Itanium-Based Clients
recovering PA-RISC clients using the network, Recovering using the Network for PA-RISC Clients
setting install params dynamically, Setting Installation Parameters Dynamically
setting up a boot helper system, Ignite-UX bootp Boot Helper
terminal user interface (see TUI)
terminology, Glossary
TFTP, Ignite-UX Server Requirements
tftpd daemon
bad LIF magic IPL error, Installing Systems with Ignite-UX
enabling, Ignite-UX Server Requirements
logging, Logging to syslog.log
PXE booting error, Installing Systems with Ignite-UX
time zone, setting, System Tab
troubleshooting
Ignite-UX server problems, Ignite-UX Server Problems
installing from images, Installing from Golden Images
installing from media, Installing from Media
installing systems, Installing Systems with Ignite-UX
tape recovery, System Recovery Questions and Answers
TUI
overview, Ignite-UX Features
selecting client TUI for install, Configuring Server Options
troubleshooting, Installing Systems with Ignite-UX
using to install clients, Installation Using the Ignite-UX GUI
using to install from the client, Installing HP-UX From the Client Console
two-step media recovery, Tape Recovery With No Tape Boot Support — Two-Step Media Recovery
create bootable CD/DVD example, Create HP-UX 11i v3 bootable CD/DVD media for two-step media recovery
creating CD/DVD with make_media_install, Using the make_media_install and the make_opticaldisc_recovery scripts
mixing Ignite-UX versions, Creating and Using Recovery Tapes, Tape Recovery With No Tape Boot Support — Two-Step Media Recovery

U

user interface
recovery matrix, Comparing System Recovery Tool Features
selecting server or client for install, Configuring Server Options

V

Veritas (see VxFS) (see VxVM)
view menu screen, Introduction to the Ignite-UX Graphical User Interface
vMedia
and ISO images, Assumptions
in decision tree for stand alone system, Boot Using Media
using with Ignite-UX, Using Integrated Lights Out Virtual Media with Ignite-UX
volume group name
changing, ---- Additional Tasks ---- List Button
volume requirements, Volume Requirements for LVM and VxVM
VxFS
configuration for client, Adding or Changing a File System Configuration
matching versions with VxVM, Considerations When Using Veritas Volume Manager from Symantec
mixed versions with VxVM, Considerations When Using Veritas Volume Manager from Symantec
recovery considerations, Considerations When Using Veritas Volume Manager from Symantec
selecting for client install, File System: List Button
selecting version for client install, ---- Additional Tasks ---- List Button
VxVM
agile view DSFs, Important Characteristics of the Agile View
config file example, Example Configuration Files
expert recovery considerations, Recovering the LIF/EFI Volume and Critical HP-UX Files
file system default choices, File System: List Button
file system size limitations, Adding or Changing a File System Configuration
group parameters, ---- Additional Tasks ---- List Button
multiple versions in depot, SD Software
recovery considerations, Considerations When Using Veritas Volume Manager from Symantec, Recovery Image Creation Process
supported devices, Disks and Other I/O
volume parameters, ---- Additional Tasks ---- List Button
volume requirements, Volume Requirements for LVM and VxVM

W

websites
feedback, HP Encourages Your Comments
HP technical documentation, Related Documents
software depot, Getting the Ignite-UX Software
white papers, Getting the Ignite-UX Software
welcome dialog box
configuring to display or skip, Configuring Session Options
whole disk, File System: List Button
Printable version
Privacy statement Using this site means you accept its terms Feedback to webmaster
© Hewlett-Packard Development Company, L.P.