| Commands in /opt/ignite/bin : |
| add_new_client(1M) | Add a client to an Ignite-UX server without
requiring a client boot from the Ignite-UX
server. |
auto_adm(1M) auto_adm(4) | Manage logical
interchange format (LIF) AUTO configuration files. Description of auto_adm file formats |
| bootsys(1M) | Reboot and
install systems using Ignite-UX. |
| check_net_recovery(1M) | Compare the
files on a running system with a recovery archive made with make_net_recovery. |
| check_tape_recovery(1M) | Compare the
files on a running system with a recovery archive made with make_tape_recovery. |
| copy_boot_tape(1M) | Replicate a
PA-RISC boot tape. |
| ignite(5) | Configure, install,
and recover HP-UX systems. |
instl_adm(1M) instl_adm(4) | Manage Ignite-UX configuration files. Description of configuration
file syntax. |
| instl_dbg(1M) | Parse and debug
a client's configuration files. |
| make_boot_tape(1M) | Create a boot tape for a PA-RISC system. |
| make_bundles(1M) | Create Software
Distributor (SD) bundles
in a depot. |
| make_config(1M) | Generate a configuration file for software in an SD depot. |
| make_depots(1M) | Create SD depots from SD bundles for use
by Ignite-UX. |
| make_ipf_tape(1M) | Create a bootable
ANSI labeled tape for Itanium-based systems. |
make_medialif(1M) | Create
bootable Ignite-UX LIFmedia image file. |
| make_net_recovery(1M) | Create recovery images and store them on a network system. |
| make_tape_recovery(1M) | Create recovery images and store them on tape. |
| manage_index(1M) | Manage Ignite-UX INDEX files without directly editing
them. |
| print_manifest(1M) | Print a system manifest. |
| save_config(1M) | Create hardware configuration file. |
| Commands in /opt/ignite/lbin: |
ansitape(1M) ansitape(5) | Read and write magnetic
tapes conforming to the ANSI standard for magnetic tape labelling. Description of ANSI-labeled tape format. |
| archive_impact(1M) | Calculate the per file system disk space for
tar, cpio, and tar archives, and create the impacts statements for use in configuration
files. |
| instl_bootd(1M) | Boot protocol server for Ignite-UX clients. |
instl_combine(1M) | Combine
a LIF volume and file system for use on CD/DVD. This command is used to construct custom, bootable, installation media. An example script, /opt/ignite/data/scripts/examples/make_media_install, is provided that can help you create bootable media (PA-RISC tapes,
CDs, and DVDs) with or without golden archives and/or SD depots included. |
| pkg_rec_depot(1M) | Create a depot containing Ignite-UX recovery filesets. |
| setup_server(1M) | Perform some
administration tasks for an Ignite-UX server. |
| Commands in /opt/ignite/data/scripts: |
| make_sys_image(1M) | Create an archive of a client. |
Printable version
